THE
FOUNTAIN COMPANY
|
Here is a selection of some of our outdoor fountains which may be situated in a pond or specially designed rubberised plastic container set into the ground and filled with water and cobbles.
|
Click any photograph below for a by 3 enlargement.
 | Ref. No. PF1 :
This large fatsia fountain was built to special order and is quite stunning in appearance.It stands about a meter high, and because of the amount of water loss, it is only suitable for a pond of at least 2M across. However, if you have the right situation, it will make a marvellous centrepiece.
|
 | Ref. No. EMSCF1 :
This multistem fatsia is a combination of two of my most popular fountains, and has proven to be equally as desirable. Whilst not as dainty as my normal fountain, it splashes somewhat less and therefore needs less regular topping up.
|
 | Ref. No. FAT :
First shown at Blickling at Easter 2006 this delicate fountain based on the Fatsia japonica leaf proved an instant success. The water flows from most of the tips of the top four leaves falling onto the lower leaves to produce a soft gentle tinkling sound. This fountain is also extremely attractive even when the water is not running
|
 | Ref. No. EB1.6.5 :
On the left is the Bamboo fountain at night, one of our most intricate designs and suitable for a large pond. Its elegant grace and delicate water flow produce one of the most pleasing effects of all our fountains.
This pond fountain is bolted to a heavy paving slab for perfect stability, and is around 165 cm. high and 45 cm. in diameter. We will be pleased to vary the dimensions, if required, to suit your individual needs, and pond size. In order to do this however we need to know the depth of your pond at the point where the fountain will stand so that we can select the optimum size of pump.
|
 | Ref. No. EB1.0.5 :
Built by special request I wasn't convinced that a five stem bamboo would work in a pebble pond. My own feeling was that it would look too cluttered. I am pleased to say that I now feel that I was wrong.
I very much welcome clients' input and this was a classic case where the customer was most definitely right
This fountain stands about one metre high and is constructed of 10mm and 9.5mm hard copper tube. I frequently display a 3 stem model, which has been treated with a black patination fluid to represent phyllostachys nigra
|
 | Ref. No. AL :
The leaves were always easy on this fountain, but I am indebted to jeweller Karen Faulkener-Dunkley, (www.kfdjewellery.com ) for showing me how to make the flowers. This fountain caused quite a stir when it was first shown at Chilford vineyard in October 2004.
|
 | Ref. No. EMSC12 :
Similar to but much larger than the patio fountain, the multistem cascade fountain can stand up to 1.6M high and have up to 12 stems.
To allow for a reasonable fall between leaves, the twelve stem is the tallest and requires the largest pond. In especially windy sites, a special thick walled hard copper tube is used for the taller stems. The twelve stem also looks very elegant in a pebble pond with cobble stones and green or purple slate
All my outdoor fountains are shown in bare pebble ponds for clarity of display but are equally at home in a full- scale garden pond. However when I make a fountain for a pond I need to know the depth of water in which it will stand.
|
 | Ref. No. EH1 : This heart shaped fountain gives a good flow of water and therefore an excellent sound. It is robust and unusual in design. Approximate dimensions are 80cm wide by 1.2m high. The dimensions can of course be changed to accommodate your own pond, although the fountain pictured here would suit a pond of about 5M diameter. All of our fountains come with a choice of leaf size and shape, or you could design your own leaf and we could use that for your own fountain. All of our outdoor fountains are bolted to a paving slab for increased stability. |
 | Ref. No. EDHP1 : Here we have another large pond fountain, which is bolted on to a heavy paving slab for perfect stability, and is around 165 cm. high and 45 cm. in diameter.
We will be pleased to vary the dimensions, if required, to suit your individual needs, and pond size. In order to do this however we need to know the depth of your pond at the point where the fountain will stand so that we can select the optimum size of pump. |
 | Ref. No. EMS1 : The elegant multistemmed cascade fountain is another of our most popular designs. The smooth flow of water makes a gentle tinkling sound as it strikes every leaf, which is very relaxing especially in the evening.
It is usually made with the arum lily leaf but other leaves are almost as effective. |